P003E BMW Fault Code

Description:

The Throttle Position sensor signals the Engine Control Module as to the current position of the engine throttle valve.
The current throttle valve opening is based on the driver's input from the gas pedal.

The ECM uses the information from this sensor to help calculate fuel delivery and spark timing.

P003E Code Symptoms :

There are currently two main types of cylinder deactivation used today, depending on the type of engine. P003E code for the pushrod design which uses solenoids to alter the oil pressure delivered to the lifters. In their collapsed state, the lifters are unable to elevate their companion pushrods under the valve rocker arms, resulting in valves that cannot be actuated and remain closed.

Diagnosis And Repairing P003E

P003E OBD 2 code on vehicles with electronically controlled automatic transmissions, the 3-4 shift solenoid is responsible for actuating the hydraulic circuits to activate clutches or bands that change gears inside the automatic transmission.

How to fix P003E code ?

• Faulty Air Flow Meter
• Faulty Variable Camshaft Timing (VCT) position solenoid
• Dirty Oil
• Intake air leaks

Some systems require that the actuator has an adequate supply of brake fluid. Low brake fluid levels can mimic the symptoms of code P003E, so consult the manual to locate the brake fluid reservoir.

Bear in mind that a low fluid level can set code P003E on some applications, so make sure that on fluid operated systems the fluid level is up to the mark before starting an electrical diagnosis.